Non-Environmental EMI/RFI G-Spring Backshells

Series 460

G-Spring EMI/RFI Backshell Provides 360° Grounding Without Damaging Shielding

Ideal for applications in which the make-up of the shield does not easily permit forming over a ground ring, banding platform or other terminating device

Glenair's "G-Spring" backshells provide an innovative method of terminating and grounding overall shields, screens and metal foil shielding on wiring harnesses and cables. The G-Spring design provides a peripheral spring member which compresses against the exposed shield to effect positive electrical grounding around the entire circumference of the shield. This design is particularly well suited for applications where disturbance or distortion of the shield is undesirable, or the makeup of the shield does not easily permit forming over a grounding ring or other termination device. It is available in both non-environmental and cable jacket sealing versions. An inner support ring inserted under the shield or screen prevents damage to the wire conductor insulation at the point where the G-Spring makes contact with the shield.

Reference

Circular > Series 460

469-001

469-001
Shield Support Ring for Use with G-Spring Backshells

For use with Series 460 and 463 G-Spring Backshells
460-001

460-001

EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief
Rotatable Coupling - Low Profile
460-002

460-002

EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief
Direct Coupling - Low Profile and Split 90°
460-003

460-003

EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief
Rotatable Coupling - Standard Profile
460-011

460-011

EMI/RFI Non-Environmental G-Spring Backshell with Strain Relief
Self-Locking Rotatable Coupling - Standard Profile