Glenair Code A
The Connector Accessory > Contact Types
Design Features
- Bayonet coupling design, quick disconnect
- Eight shell sizes--Range 8 thru 24 (.500 to 1.500 diameter)
- 12, 16, 20, and 22 gage contacts, standard density, 3 to 61 contacts
- Conductive and non-conductive finishes; electroless nickel, cadmium/olive drab, 500 hour salt life, and anodic
- Shell grounding available on MS and commercial part numbers
- Controlled accessory interface per MS3155
- Captive bayonet coupling nut
- Cork and bottle primary insert interface seal and shell environmental seal, fuel resistant fluorosilicone elastomers
![MIL-C-Connectors, Circular, MS3470 Series MIL-C-26482 Series 2, Crimp Contacts Rear Release; Glenair Code A](img/backshells/pg9.gif)
Notes
- Same interface features as MS3120 and MS3126, intermateable
- Ruggedized accessory interface geometry, 3 full threads minimum, heavier barrel wall thickness, interlocking teeth
- Accessory thread size and geometry is not intermateable with MIL-C-26482, series 1, connector accessory