Conductive Gaskets And Accessories

Conductive Gaskets And Accessories

Key Elements in Every Interconnect System Designed for Optimal EMC Performance

Designers of interconnect cable systems have a responsibility to manage potential sources of electromagnetic interference. This includes shielding electronic boxes to prevent the emission of EMI from electronic system components, as well as shielding interconnect cabling to prevent interference from grounding to wire circuits. Key technologies in EMC design include conductive panel gaskets, connector o-rings, and conductive braided cable shielding. Backshells used as cable shield termination devices are also critical components in a well-designed interconnect system. Glenair is the world's largest manufacturer and supplier of EMC connector accessories, EMI/RFI braided shielding, and the assembly tools required for proper installation and use of these technologies. This section of the catalog introduces just a few of the more important accessory elements in systems designed for EMC.

Reference

EMI/EMP Filter Connectors > Section L

D38999 O-Ring for Jam Nut Receptacle Connectors, 239-205

239-205
D38999 O-Ring for Jam Nut Receptacle Connectors

MIL-DTL-38999 Series III Type Backshells and Accessories
Conductive O-Ring for D38999 Jam Nut Receptacles, 249-001

249-001
Conductive O-Ring

For D38999 Jam Nut Receptacles
Conductive Gasket for D38999 Wall Mount Receptacles, 249-002

249-002
Conductive Gasket

For D38999 Wall Mount Receptacles
Conductive O-Ring for Mighty Mouse Jam Nut Receptacles, 249-003

249-003
Conductive O-Ring

For Mighty Mouse Jam Nut Receptacles
EMI/RFI Backshell for MIcro-D Filter Connectors, 249-005

249-005
EMI/RFI Backshell

For Micro-D Filter Connectors
EMI/RFI, Split Top Entry Backshell, Banding for Series 280 Hiper-D Fiter Connectors, 289T205

289T205
EMI/RFI, Split Top Entry Backshell, Banding for Series 280 Hiper-D Fiter Connectors

EMI/RFI Backshell for Series 280 Hiper-D Filter Connectors
EMI/RFI Backshell for C-Filter Micro-D Connectors, 249-006

249-006
EMI/RFI Backshell

For C-Filter Micro-D Connectors
Jackscrew/Jackpost Kits for Filter Micro-D Adapters and Filter D-Sub Adapters, 249-033 and 249-051

249-033 and 249-051
Jackscrew/Jackpost Kits

For Filter Micro-D Adapters and Filter D-Sub Adapters
Jackpost Kit for Rear Panel Mount Micro-D Connectors, 179-045

179-045
Jackpost Kit

For Rear Panel Mount Micro-D Connectors
103-026, -027, -031, -051, Microfilament Composite Braid

Microfilament Composite Braid

  • 103-026 and 103-027
    AmberStrand® EMI/RFI MicroFilament Composite Braided Shielding 100% Composite and 75%/25% Blended Versions
  • 103-051
    ArmorLite™ Lightweight EMI/RFI MicroFilament Stainless Steel Braided Shielding
ArmorLite Single-Layer ESD Grounding Strap Light Duty, Low Profile, 107-098

107-098
ArmorLite Single-Layer ESD Grounding Strap

Light Duty, Low Profile
ArmorLite Dual-Layer Equipment Grounding Strap Medium Duty, Low Profile, 107-099

107-099
ArmorLite Dual-Layer Equipment Grounding Strap

Medium Duty, Low Profile
103-026, -027, -031, -051 Manual Tools and Bands Band-Master™ ATS

Band-Master™ ATS

103-026, -027, -031, -051
Manual Tools and Bands