Glenair High-Speed Micro-D Connectors and Cables

High-Speed Micro-D uses an impedance optimized open pin field for high-density signal routing flexibility. 1 Amp pre-wired cable and PCB solutions deliver up to 15 Gbps performance per differential pair. Auxiliary EMC ground springs on plugs ensure data integrity and low attenuation performance.

For USB 3.010GbECamera LinkPCIe 3.0

Series GHSM

The High-Speed Micro-D achieves its high-speed signal integrity and high data rate performance through innovative modifications to the standard Micro connector insert, principally in the use of an ultra-low dielectric insulation material, but in addition, with the use of Nano TwistPin contacts, exactingly spaced and isolated to eliminate cross-talk and maintain impedance levels through the connector mating interface.

Available in both prewired factory cordsets — with hybrid shielded twisted pair (STP) and standard hookup wire cabling — as well as PCB configurations, the High-Speed Micro-D utilizes #28 gauge wire and is rated at 1 amp per contact (instead of the usual 3 amp rating found in standard Micro connectors).

• Pre-wired factory pigtails, cordsets, and PCB connectors
• Unique contact isolation and spacing for optimal high-speed performance up to 15 Gbps
• Supports maximum #28 AWG wire
• Low-k dielectric insulator combined with optimized contact size and spacing
• Precision-machined shells with gold or nickel plating
• 1 Amp TwistPin contacts for optimal performance in harsh vibration, shock, and high-temperature environments

Like other next-generation rectangulars from Glenair, the High-Speed Micro-D incorporates an auxiliary EMI ground spring on the plug, further enhancing the signal integrity of this ultra-small form-factor connector. In fact, the High-Speed Micro-D's size is perhaps its most important advantage as it is now arguably the smallest and lightest aerospace-grade high-speed interconnect.

The downselect process begins with the identification of the target high-speed protocol. Each insert arrangement in the series is purpose-designed to meet the particular requirements of today's most popular high-speed datalink protocols. Prewired pigtail assemblies utilize shielded twisted pair cabling for the high-speed data pairs, and #28 gauge hookup wire for power and low-speed signal requirements. Ground wire terminations are also indicated for each insert arrangement. Consult Glenair Design & Installation of High-Speed Micro-D PCB Connectors Application Note for board layout and termination requirements.

Reference

• Overview: Glenair High-Speed Micro-D Connectors and Cables
• Table of Contents
• Introduction to the Series
• Mod Code 429 for Space Applications
• Materials and Finishes Performance Specification
• Recommended Panel Cutout Dimensions for Panel Mount Connectors
• High-Speed Protocols and Insert Arrangements
• Wiring Diagrams

Related Glenair Content

• High-Speed Connectors and Contacts for High Data-Rate Transmission Protocols including USB.30, 10G Ethernet, SATA, DVI, HDMI, and Others
• High-Speed Interconnect Solutions for Military Defense / Aerospace Applications
• MIL-DTL-83513 Micro-D and Glenair Commercial Equivalent Rectangular Connectors and Cables
• Mil-Spec Rectangular Connectors
• Modular Micro-D – Innovative Modular Micro-D Connectors and Cables for RF, Signal, and High-Speed Data Links
• Space-Grade Connectors, Hold Down Release Mechanisms, and Wire Harness Fabrication
• VersaLink™ – Ultra-Miniature Micro-D Connectors with High-Speed VersaLink Contact Technology

	GHSM Prewired Pin and Socket Cable Connectors Pigtails and Double-Ended Assemblies GHSM cable connectors are pre-wired for use with specific high-speed datalink protocols. Each assembly is available as a single-ended wire pigtail or back-to-back jumper, pre-wired with STP cable for dedicated differential data pairs (plus ground wire). Remaining contacts are terminated with standard hook-up wire for low-speed signal or power. Choose the insert arrangement, per the table, that matches the target high-speed protocol.
	GHSRPM Prewired Pin and Socket Rear Panel-Mount Connectors Single-Ended Pigtails
	GHSM-BSS Straight Surface-Mount Pin and Socket PCB Connectors Jackpost Hardware
	GHSM-BSS Straight Surface-Mount Pin and Socket PCB Connectors Jackscrew Hardware
	GHSM-HBR Hybrid Right-Angle (Surface-Mount / Thru-Hole) Pin and Socket PCB Connectors Jackpost Hardware
	GHSM-HBR Hybrid Right-Angle (Surface-Mount / Thru-Hole) Pin and Socket PCB Connectors Jackscrew Hardware
	GHSRPM-BSS Straight Surface-Mount Pin and Socket Rear Panel-Mount Connectors Jackpost Hardware
	GHSRPM-HBR Hybrid Right-Angle (Surface-Mount / Thru-Hole) Pin and Socket Rear Panel-Mount Connectors Jackpost Hardware
	GHSM-USP1 Sav-Con® Connector Saver 2-Row, 9 thru 67 Position Protect Sensitive Equipment with the GHSM-USP1 SAV-CON® Connector Saver Prevent contact damage and extend the service life of cable assemblies. Protect High-Speed Micro-D connectors that are mated and unmated frequently during manufacturing, test, check-out phases, and environmental test programs. Sav-Con®s prevent costly repair or replacement by absorbing connect and disconnect abuse. Sav-Con® Connector Savers The Smart Solution for Preventing Contact Damage and Extending the Service Life of Cable Assemblies and Mounted Receptacles
	500-148 Dust Covers for High-Speed Micro-D Connectors Plug and Receptacle Dust Covers
	179-045 Jackpost Kit Jackpost Kit for Panel-Mount Connectors
	179-276 O-Ring for Sealing of Panel Mount GHSRPM Connectors Replacement O-Ring for Panel Sealing of GHSRPM Connectors
	963-128-28 (100 Ohm)963-130-28 (90 Ohm) Impedance-Matched Twinax Twisted Pair Cable 963-128-28 100 Ohm Impedance-Matched Twinax Twisted Pair Cable - High-Temperature 963-130-28 90 Ohm Impedance-Matched Twinax Twisted Pair Cable - High-Temperature