Contacts and Tools – SuperNine® Advanced Performance MIL-DTL-38999 Series III Type

MIL-DTL-39029 Crimp, Power and Signal Contacts, Plus the Industry's Broadest Range of Shielded RF Contacts including El Ochito®, Quadrax, Twinax and Coax Designs

Glenair is a QPL supplier of high-performance MIL-DTL-39029 contacts, as well as a manufacturer and supplier of the industry's broadest range of shielded contacts, power contacts, and special-purpose contact technology such as optoelectronic, thermocouple and gas/pneumatic solutions. Glenair's complete range of contacts is available for immediate, same-day shipment, and is supported with appropriate crimp tools, insertion and removal tools and assembly tools to complete the project at hand.

Reference

	Contacts M39029 and Glenair Signature Solutions MIL-DTL-38999 Series III Type Contacts D38999 QPL Crimp Contacts Extended Durablity (1500 Cycle) D38999 QPL and Commercial Crimp Contacts Extended Durability D38999 QPL and Commercial Equivalent Crimp Contacts Size #23 Contacts for High-density contact arrangements Size #16 Coaxial Contacts Size #12 Coaxial Contacts Size #12 Pneumatic Contacts #8 High Power Contacts Size 8 Cavity Optoelectronic Contact Size #8 Coaxial Contacts Size #8 Concentric Twinax Contacts Size #8 Quadrax Contacts Thermocouple Contacts
	GHV-002 kV Seal Plus Size #12 Contacts GHV-002 kV Seal Plus Size #12 15 kV contacts for Glenair SuperNine and D38999 Series I, III, and IV connectors kV Seal Plus with molded-in socket and longer-nose pin for 15 kVDC operation Drop-in performance in Glenair Signature SuperNine and MIL-DTL-38999 Series I, III, and IV connectors
	Crimp Contact Termination Instructions MIL-DTL-38999 Series III Type Contacts How to Terminate, Install, and Remove Crimp Contacts
	El Ochito® Octaxial "White," "Blue," and "Red" Contacts and Assembly Tools MIL-DTL-38999 Series III Type Environmental Connectors 1000BASE-T/10GBASE-T El Ochito® "White" octaxial contacts provide 10 Gigabit Ethernet in the same size as 100BASE-T Quadrax contact SuperSpeed USB Low-dielectric material. Up to 5 Gbps. 90 ohms. El Ochito® "Blue" octaxial contacts provide an aerospace-grade solution for SuperSpeed USB. HDMI, Displayport, SATA Low-dielectric material. Up to 5 Gbps. 100 ohms. El Ochito® "Red" octaxial contacts provide an aerospace-grade solution for multi-gigabit data rates.
	600-280 El Ochito® Contact Termination/Installation Kit MIL-DTL-38999 Series III Type Environmental Connectors 600-280 Tool Kit combines all the tools necessary to terminate El Ochito red, blue, and white contacts. Great for customers looking to terminate el Ochito® contacts to cables. Unit includes portable protective case with cutout foam for ease of transportation. Order by kit level for simplified ordering. Customize tool kit contents to meet your specific requirements. Additional foam cutout cavities allow for easy to upgrade your kit as you increase your el Ochito tool collection. For full-range of El Ochito Contact Termination/Installation Kit options for other Glenair connector series (ARINC, 792, 28, 801, 805, 806, and 816), please see: 600-280 El Ochito® Assembly Kit
	Crimp Tools & Positioners MIL-DTL-38999 Series III Type Tools Miniature Adjustable Crimp Tools Positioners for use with Miniature Adjustable Crimp Tools Crimp Tool and Positioner for #12, #16, and #20 Power Contacts, Crimp Adapters Crimp Tool and Positioner for #16 Coaxial Outer Contact Crimp Tool and Positioner for #12 Coaxial Outer Contact Parallel Action Crimp Tool and Hex Die Set for 50 OHM Matched Impedance #12 Coax
	Insertion and Extraction Tools and Retention Tester MIL-DTL-38999 Series III Type Tools Contact Insertion and Extraction Tools Contact Retention Tester for SuperNine Contacts Complete Kit: 859-252-22H4
	Dummy Contact Sealing Plugs (DCSP) MIL-DTL-38999 Series III Type Weight/Cost-Saving For reliable sealing of unused contact cavities — without the use of electrical contacts Powerful tool in Electrical Wire Interconnect System weight reduction Eliminates use of expensive electrical contacts for sealing-only applications Leverages connector contact clip for secure retention of the sealing plug—no possibility of FOD Easy-to-install single piece design Visible quality control / confirmation of cavity fill from back of connector EWIS compliant test report available, ref. GT 15-106
	859-106 Size 8 Plastic Sealing Plug for D38999 MIL-DTL-38999 Series III Type Weight/Cost-Saving Plastic sealing plugs are for use in MIL-DTL-38999 Series III arrangements with size 8 catvities. Optional grommet follower is designed to fit Glenair connector grommet.
	601-100 Band-Master ATS® Banding Tool MIL-DTL-38999 Series III Type Tools The 601-100 Standard Band-Master ATS® Tool weighs 1.18 lbs., and is designed for standard flat .24" width clamping bands (601-005, 601-040 and 601-049) in a tension range from 100 to 180 lbs. Calibrate at 150 lbs. ± 5 lbs. for most shield terminations. Tool and band should never be lubricated. Short Flat 601-005 Short Precoiled 601-006 Medium Flat 601-040 Medium Precoiled 601-041 Long Flat 601-049 Long Precoiled 601-050
	600H005 Connector Holding Tool, Plug, and Receptacle MIL-DTL-38999 Series III Type Tools Receptacle Holder Plug Holder
	TG90 Connector Wrench MIL-DTL-38999 Series III Type Tools
	600-157 Composite Hex-Coupling Wrench MIL-DTL-38999 Series III Type Tools Stainless Steel Tool for use with Glenair Composite Backshells
	859-252 Contact Retention Tester Kit MIL-DTL-38999 Series III Type Tools Complete Kit: 859-252-22H4