RF, Microwave, and mmWave Interconnects. Coax Cable Assemblies for Harsh Land, Sea, Air, and Space Applications.

Turnkey Coaxial Interconnect Solutions: Integrated RF Interconnect Assemblies built from Aerospace-Grade Connectors, Contacts, Adapters, and Glenair BluMark RF Coax Cables

Series 795 Series 806 Series 852 Series 962 Series GRF02

Glenair is one of just a few interconnect manufacturers that can supply turnkey RF transmission line assemblies—fully connectorized and ready for immediate use—built 100% in-house with Glenair component parts. Glenair high-frequency RF assemblies are typically used in line-replaceable units and chassis that are part of an RF data transmission chain. The rugged, environmental construction of Glenair multi-port RF connector shells and contacts, combined with our high-reliability BluMark RF coax cables, makes these turnkey transmission line solutions ideal for mission-critical air, sea, land, and space applications with exacting size, weight, and frequency requirements.

Reference

• Overview: RF, Microwave, and mmWave Interconnects and Coax Cables
• Catalog Table of Contents

Contact Arrangements

• Contact Arrangements for SuperNine RF, Series 806 RF, Series 795
• Contact Arrangements for RF Rectangular

Home > RF, Microwave, and mmWave Interconnects

---

Our Unique High-Frequency RF Interconnect Value Proposition

Turnkey Solutions: Integrated RF assemblies built around Glenair aerospace-grade COAX connectors, contacts, adapters, and cables.

Glenair BluMark RF™ Cable, Contact, and Connector Ecosystems

On this page...

• Coax Cables: Series 962 BluMark RF 50 Ohm
• Series 23 SuperNine RF Multi-Port Connectors
• Series 806 Mil-Aero, Multi-Port RF Circular Connectors
• Series 795 High-Density, Multi-Port RF Rectangular Connectors
• Series GMMD Modular Micro-D Coax Connectors
• RF Jumpers and Assemblies
• Series GRF05 RF Connector Adapters
• RF Connector Accessories

• Low attenuation FEP, ETFE, and Polyurethane jackets
• Low-phase-change cables
• Eight size categories
• Compatible with standard RF/Microwave connectors
• Available red plague mitigation certification
• Environmentally sealed assemblies also available. Contact Factory.

• Selection Guide: 50 Ohm Low-Loss Coax Cables

High-Performance, "Better-than-QPL" MIL-DTL-38999 Series III

One to 29 contacts, Size 8, 12, or 16. 233-290 connectors have machined aluminum or stainless steel shells and fluorosilicone grommet for environmental protection. Plugs feature a copper alloy ground spring for EMI protection. Twenty-two contact layouts available in eight different shell sizes. Supplied without contacts, order #8 BMB, #12 SMPM, or #16 SMPS contacts separately.

• Twenty-two MIL-STD-1560 layouts for size #8, #12, or #16 RF contacts (sold separately)
• Unibody connector design with common ground plane
• Environmental
• EMI spring on plugs
• Hermetic feedthru available

• Selection Guide: Environmental and Hermetic Class
• SuperNine RF Insert Arrangements

Micro Miniature Circular IAW MIL-DTL-38999

One to 29 contacts, Size 8, 12, or 16. Series 806 RF connectors have machined aluminum or stainless steel shells and fluorosilicone grommet for environmental protection. Plugs feature a copper alloy ground spring for EMI protection. Twenty-five contact layouts available in eleven different shell sizes. Supplied without contacts, order #8 BMB, #12 SMPM, or #16 SMPS contacts separately.

• Mil-spec performance, micro miniature package
• Twenty-five layouts for size #8, #12, or #16 RF contacts (sold separately)
• Unibody connector design with common ground plane
• Environmental
• Scoop-proof interface
• EMI spring on plugs
• Snap-in, rear-release contacts
• Hermetic Feedthru Available

• Selection Guide: Series 806 Mil-Aero, Multi-Port RF Circular Connectors
• Series 806 RF Insert Arrangements

Precision-Machined and Shielded

Series 795 connectors accommodate up to nine #8 BMB-style coax contacts. Contacts snap into connector body and are removable. Environmentally protected with fluorosilicone face seal and rear grommet. One piece connector shell provides a common ground plane and also eliminates EMI radiation through the connector. Panel mount receptacle has conductive fluorosilicone O-ring for ingress protection. #8-32 jackscrews for secure mating in high vibration environments.

• Twenty-six layouts for size #8, #12, or #16 RF contacts (sold separately)
• Unibody connector design with common ground plane
• Environmental
• Scoop-proof interface
• EMI spring available on receptacle connectors
• Snap-in, rear-release contacts

• Selection Guide: Series 795 High-Density, Multi-Port RF Rectangular Connectors
• Materials and Finishes
• Specifications
• NASA Screening and Outgassing for Space-Flight Applications
• Contact Arrangements
• Panel Cutouts

The Series GMMD is an innovative modular Micro-D connector for RF coax and high-speed differential datalink applications. The unique micro miniature design of the GMMD also accommodates standard analog signal and power contacts, making it the most versatile Micro-D rectangular in the industry. GMMD leverages RF Coax contacts with Glenair Signature Micro-D and Nano TwistPin contact inserts. GMMD is supplied as factory-terminated pigtails, point-to-point jumpers, and SMT receptacles for easy PCB mounting.

• Selection GuideCoax and Combo Coax Contact ArrangementsMaterials and FinishesPanel Cutouts

Contact Jumper and Connector Assemblies

• Factory terminated RF connector and contact cable assemblies with BluMark RF coax cable.
• 100% tested to ensure optimal RF signal performance.
• Various configurations available with industry standard interface RF connectors and contacts.
• Consult factory for vapor sealed, armored, phase matched or multi-port coax cable assemblies.

• Selection Guide: RF Assemblies

Precision-grade Series GRF05 RF Adapters are used to connect between series or within a series. Frequently used as connector savers, male-female adapters protect RF jacks on instruments from excessive wear-and-tear. 45° and 90° angled SMA male-female adapters provide extra clearance in cramped quarters.

• Selection Guide: Series GRF05 RF Connector Adapters

TNC to SMA Adapters

N to SMA Adapters

SMA to SMA Adapters

2.92 to SMA Adapters

SMP to SMA Adapters

BNC to SMA Adapters

• RF connector accessories include Protective Covers and Dummy Receptacles for standard RF coax connectors.
• Aluminum or stainless steel Covers have sealing gaskets and a variety of attachment styles.
• Panel-mounted Dummy Receptacles provide stowage and protection for RF cables.

• Selection Guide: RF Connector Accessories