IPT Series MIL-DTL-26482 Series I Type Connector

General Duty Solder and Crimp Contact MIL-DTL-26482 Series I Bayonet Connector

Harsh Application Environments

The Glenair Series IPT Bayonet-Lock Signal Connector is ideally suited for all interconnect applications that require a general-duty connector equipped with solder cup contacts and one-piece rubber insert. The bayonet coupling mechanism provides fast and easy mating, especially when the connector is situated in an awkward or hard to reach location. The connector's high resistance to vibration and shock provides foolproof performance in even the most rigorous application environments. Environmental protection to IP67 levels provides additional reliability and the flexibility to specify these rugged connectors in harsh applications such as machine tools and factory automation. Supplied solder cup contacts are gold-plated over nickel. Optional crimp contacts are available, however the Glenair IPT SE series, with its industry standard rear-release crimp contacts and retention clip mechanism is better suited for all high-performance applications that require crimp contacts. Sealing members in the IPT series are made from resilient neoprene rubber. The standard insert material is synthetic rubber. There are 40 different size 12, size 16 and size 20 insert arrangements and nine shell sizes.

Intermateability

The Series IPT Connector is interchangeable and intermateable with the wide range of industry-standard bayonet connectors designed around MIL-DTL-26482 Series I and/or qualified to VG 95328, including VEAM VPT, Amphenol PT, Amphenol Limited 62GB, and ITT Cannon KPT.

Reference

• Table of Contents
• Product Line Overview
• Styles and Classes
• How to Order • Part Number Breakdown
• Cross Section
• Technical Data
• Materials and Finishes
• Contact Dimensions
• Insert Arrangement Tables and Alternate Insert Rotation
• Alternate Key Positions
• Fastener Height Requirements and Panel Cutout Dimensions
• Available Insert Arrangements

IPT Series > Section C

---

	IPT 00 A Wall Mounting 26482 Series I Receptacle with Backshell
	IPT 00 A...N0 Wall Mounting 26482 Series I Receptacle without Backshell
	IPT 00 A...PG- - Wall Mounting 26482 Series I Receptacle with PG Threaded Backshell
	IPT 00 A...PH- - Wall Mounting 26482 Series I Receptacle with Backshell and PG Cable Gland
	IPT 00 A...PHM- - Wall Mounting 26482 Series I Receptacle with PHM Backshell and Sleeves to Accommodate Various Cable Sizes
	IPT 00 A...SR Wall Mounting 26482 Series I Receptacle with Backshell, Bushing and Cable Clamp
	IPT 00 E Wall Mounting 26482 Series I Receptacle with General Duty Backshell
	IPT 00 E...SR Wall Mounting 26482 Series I Receptacle with Backshell, Cable Clamp and Bushing
	IPT 00 G Wall Mounting 26482 Series I Receptacle with Shrink Boot Backshell
	IPT 00 J Wall Mounting 26482 Series I Receptacle with Long Backshell and Cable Clamp
	IPT 00 M Wall Mounting 26482 Series I Receptacle with Backshell for EMI Shield Termination and Shrink Boot
	IPT 00 W Wall Mounting 26482 Series I Receptacle with Long Backshell, Metal Sleeve and Gland Seal
	IPT 01 A In-Line 26482 Series I Cable Connector with General Duty Backshell
	IPT 01 A...N0 In-Line 26482 Series I Cable Connector without Backshell
	IPT 01 A...PG- - In-Line 26482 Series I Cable Connector with PG Threaded Backshell
	IPT 01 A...PH- - In-Line 26482 Series I Cable Connector with Backshell and Plastic PG Cable Gland
	IPT 01 A...PHM- - In-Line 26482 Series I Cable Connector with PHM Backshell and Sleeves to Accommodate Various Cable Sizes
	IPT 01 A...SR In-Line 26482 Series I Cable Connector with Backshell, Cable Clamp and Bushing
	IPT 01 E In-Line 26482 Series I Cable Connector with General Duty Backshell
	IPT 01 E...SR In-Line 26482 Series I Cable Connector with Backshell, Cable Clamp and Bushing
	IPT 01 G In-Line 26482 Series I Cable Connector with Shrink Boot Backshell
	IPT 01 J In-Line 26482 Series I Cable Connector with Backshell, Cable Clamp and Sleeve
	IPT 01 M In-Line 26482 Series I Cable Connector with Backshell for EMI Shield Termination and Shrink Boot
	IPT 01 W In-Line 26482 Series I Cable Connector with Long Backshell, Metal Sleeve and Gland Seal
	IPT 02 PP Through Bulkhead 26482 Series I Receptacle
	IPT 02 A and IPT 02 E Box Mounting 26482 Series I Receptacle
	IPT 02 Y Box Mounting 26482 Series I Receptacle with Printed Circuit Board Terminations
	IPT 06 A Straight Plug 26482 Series I Connector with Backshell to Accommodate MS3057 Cable Clamp (Not Included)
	IPT 06 A...N0 Straight Plug 26482 Series I Connector with Accessory Threads
	IPT 06 A... AT Straight Plug 26482 Series I Connector with Accessory Threads and Arctic Coupling Nut
	IPT 06 A...PG- - Straight Plug 26482 Series I Connector with PG Threaded Backshell
	IPT 06 A...PH- - Straight Plug 26482 Series I Connector with Backshell and PG Cable Gland
	IPT 06 A...PHM- - Straight Plug 26482 Series I Connector with PHM Backshell and Sleeves to Accommodate Various Cable Sizes
	IPT 06 A...PHM- -EMI67 Straight Plug 26482 Series I Connector with Backshell for EMI Shield Termination
	IPT 06 A...SR Straight Plug 26482 Series I Connector with Backshell, Cable Clamp and Bushing
	IPT 06 E Straight Plug 26482 Series I Connector with General Duty Backshell
	IPT 06 E...PG- - Straight Plug 26482 Series I Connector with PG Threaded Backshell
	IPT 06 E...SR Straight Plug 26482 Series I Connector with Backshell, Cable Clamp and Bushing
	IPT 06 G Straight Plug 26482 Series I Connector with Backshell for Heat Shrink Boot
	IPT 06 J Straight Plug 26482 Series I Connector with Long Backshell, Metal Sleeve, Cable Sealing Gland, and Cable Clamp
	IPT 06 W Straight Plug 26482 Series I Connector with Long Backshell and Cable Sealing Gland
	IPT 06 M Straight Plug 26482 Series I Connector with Backshell Suitable for EMI Shield Termination and Heat Shrink Boot
	IPT 07 A Rear Box Mount Jam Nut 26482 Series I Receptacle Connector
	IPT 07 E Rear Panel Mount Jam Nut 26482 Series I Receptacle Connector with Backshell
	IPT 07 E...SR Rear Panel Mount Jam Nut 26482 Series I Receptacle Connector and Backshell with Cable Clamp and Bushing
	IPT 07 Y Rear Box Mount Jam Nut 26482 Series I Receptacle with Printed Circuit Board Contacts
	IPT 071 YK Rear Box Mount Jam Nut 26482 Series I Receptacle with Standoff and Printed Circuit Board Contacts
	IPT 08 AM Plug 26482 Series I Connector with 90° Backshell Suitable for MS3057 Cable Clamp
	IPT 08 A...PHM- - Plug 26482 Series I Connector with 90° PHM Backshell and Sleeves to Accommodate Various Cable Sizes
	IPT 08 EM Plug 26482 Series I Connector with 90° Backshell with MS3057-A Cable Clamp
	IPT 08 M Plug 26482 Series I Connector with 90° Backshell for Shield Termination and Shrink Boot
	IPT 26 A Panel Plug 26482 Series I Connector